Mhtuner.com

MHTuner reducing wear and tear by Pennzoil

2010-07-17T18:55:00.000-07:00

New fully synthetic from Pennzoil

The International Lubricant Standardization and Approval Committee (ILSAC) also has standards for motor oil. Their latest standard, GF-4 was approved in 2004. A key test is the Sequence IIIG, which involves running a 3.8 L, GM 3.8 L V-6 at 125 horsepower (93 kW), 3600 rpm, and 150 °C (300 °F) oil temperature for 100 hours. These are much more severe conditions than any API-specified oil was designed for: cars which typically push their oil temperature consistently above 100°C (212°F) are most turbo-charged engines, along with most engines of European or Japanese origin, particularly small capacity, high power output.

API SM - American Petroluem Institute (API) Service/Petrol or Spark Ignition Engine(S) For all automotive engines currently in use. Introduced in 2004, SM oils are designed to provide improved oxidation resistance, better wear protection, and better low-temperature performance over the life of the oil. Some SM oils may also meet the latest ILSAC specification and/or qualify as Energy Conserving

SEMI SYNTHETIC from Penzoil

API - American Petroleum Institue

ILSAC - International Lubricant Standardization and Approval Committee

SM - Introduce in 2004, provide improved oxidation resistance, better wear protection, and better low-temperature performance over the life of the oil.

SG - For 1993 and older engines.

CF - Introduced in 1994. For off-road, indirect-injected and other diesel engines including those using fuel with over 0.5% weight Sulphur. Can be used in place of CD oils.

CD - Introduced in 1955. For certain naturally aspirated and turbocharged engines.

GF-4 Their latest standard, GF-4 was approved in 2004, and applies to SAE 0W-20, 5W-20, 0W-30, 5W-30, and 10W-30 viscosity grade oils

General lubricant

Get your engine wear and tear reduce by Pennzoil. Contact MHtuner for more details.

MH Tuner, 1.8 NA Champions again at MUSC Drag Challenge Cyberjaya 2010 Round 3

2010-04-01T03:54:00.000-07:00

On the 28th of March 2010, MH Tuner Motorsports Racing Team participated in the 3rd round of the MUSC Cyberjaya Drag Challenge. This time around instead of just sending in the usual NA monsters, the team opted to trial run the Mivec Turbo machine which was jockeyed by Brother Zack. In total the MH Tuner Motorsports Team registered 3 machines to take part in the 1.8 NA category and 1.8 turbo category respectively. The 2 NA machines, KAP and WEM finished with podium finishes ( 1st and 3rd ) while the Mivec turbo managed to perform positively giving chief foreman, Abg Mal the reason to smile for the next round.

Catch some of the highlights from the race day below:

MUSC Drag Challenge 2010 Round 3, 28 Mar '10, Persiaran Selatan Cyberjaya

Final preparations before the 1.8 Na ( Mitsu/Proton ) category kicks off

The Mivec turbo jockeyed by Brother Zack awaiting the 1.8 Turbo category later that night

Gearing up to move into the starting grids

WEM 8885 4G93 Mivec

KAP 3443 4G93 NA

Free running

Amal awaiting his turn to free run

Staging

Mat Jeng having a look at his meters and gauges before blazing the track

Amal awaiting his turn to hit the grids yet again

Mat Jeng cooly looks on as the rest clock their best time

Amal in full focus

Best time heats

Clocking the fastest time of the race

Champions again!!

The MH Tuner familia cooling off after a well deserved victory

It was yet another successful race for the MH Tuner Motorsports family. See you guys in the next round during the MUSC Drag Challenge 2010 Round 4 in April. Till then, " NEVER UNDERESTIMATE".

MHTuner - Portable Lube/Fuel tank 20 Liter

2009-12-08T20:26:00.000-08:00

We are selling the item below.. ready for grab

Comes with filler hose.

Meterial : Aluminum

Price : RM150/set

MHTuner - EG6 - Weekend Warrior part 2

2009-12-08T20:05:00.001-08:00

Progress work till on the road

Final Check for 200hp

MHTuner - EG6 - Weekend Warrior Part 1

2009-10-28T23:56:00.000-07:00

Building up and enchancing performance and look on Honda Civic EG6 Chasis.

We start on ripping of everything up to the original paint.. The existing of any attachment to the original body frame were rip off. The the new life/story begins.

After everything were rip off, we rip off the color that attach to the skin of the body..

And the story continue..

Update.. Apologies to All Customer

2009-10-28T23:18:00.000-07:00

We have very slow movement on updating the blog. Sorry for any inconvenience and Apologies to all readers and followers. MHtuner will be update shortly.

AAM-KKS Tarmac Rally Round 2

2009-05-12T01:40:00.000-07:00

MHtuner entered round 2 AAM-KKS Tarmac Rally. This time the event held near by stadium Shah Alam near the Perodua Show Room in front of Giant Hypermarket. AT this time our machine change a few setting i.e Damper height and exaust piping. Muzambique and Rouf is more comfort with these setting. Mhtuner got 4th Place for overall champion for Driver and Co-driver and 3rd place for class categories.

Photo By : Paul Russel

Winning Trophy

MHTuner - Say "NO" to illegal racing

2009-04-27T07:44:00.000-07:00

On 19April2009 MUSC organized Drag Challenge Round 6 at KPM Sri Iskandar Perak. MHTuner represent our Weekend Warrior 1.8L machine.

As a result we got 3rd place at final race and 2nd Runner Up for overall race.

The spirit of Motorsport continue and this time our Weekend Warrior nominated as Champion at Melaka Sprint Challenge 2009 held at Kawasan Perindustrian Bukit Rambai Fasa 4, Melaka.

For those who are not in any winner position don't give up. Keep up the spirit of motorsport alive in your soul. See you till next race, perhaps at Sepang Circuit for Sepang Drag Battle. Keep up the healthy competition

Gearbox Down update

2009-04-07T07:41:00.000-07:00

This week mhtune quite busy replacing new clutch set, bush replacement, suspension setup for both of machine Evo 8 and WRX Impreza.

A few photo taken just for customer update review. We hope that all of our customer understand why sometimes we take times to reply all emails. We apologies for any inconvenience.

WRX IMPEZZA JOB

EVO 8 Mivec Turbo

Gates Racing Timing Belts For 4G93 MIVEC

2009-04-02T08:53:00.000-07:00

"GATES" trusted brand for your timing belt. Now it can run more than 300,000 km

Product type : Timing Belt
Product Brand : Gates Racing
For Engine : 4G93 MIVEC and MIVEC turbo
Price : RM600 include shipping cost within MALAYSIA only (without installation)

Why "GATES"??

Cylinder Head : Mitsubishi Mivec
Cylinder Block : 4G93
Compressor : GARRET AR.50
Extractor : Custom
Timing Belt : Gates Racing

HOW TO PURCHASE click here

MHTune Advert

2009-04-01T02:15:00.000-07:00

MH Tune Advert produce by Mr. AMAL - thanks bro

How To Purchase @ Mhtuner

2009-03-24T18:39:00.000-07:00

STEP 1 - Viewing Item

Click item to view large image

STEP 2 - Confirmation

Call/Email us
to order stock
to confirm stock
to confirm specification and justification
to confirm delivery method
to confirm Mhtuner Bank Account/Swiss Code

STEP 3 - Payment

Online Fund Transfer/ Intergiro Bank Transfer
Cash Bank Deposit
Cheque/Bank Draft/TT Transfer
Credit Card/Debit Card (Master / Visa ) - Only at mhtuner physical office

**All cleared payment will be announce via phone or email
**Email us evidence of payment for payment via cheque/TTransfer
**Delivery process will be proceed once the payment is clear

STEP 4 - Delivery

Delivery method

Selfpicked
By Dispatch
By Courier (Poslaju)
International Courier by DHL/UPS

**Customer bear all cost
**mhtuner will communicate due to traking code

JE Piston and IZUMI Piston for 4G9x NA & MIVEC

2009-03-19T23:39:00.000-07:00

New items coming around. Come and get it now! First Come First Serve
All items are ready stock.

[CLICK TO VIEW LARGE IMAGE]
Item Type : Piston
Product Name : IZUMI Piston
Specification : 82mm
For Engine : Mitsubishi 4G9x & MIVEC
Comes with Piston Pin (small bearing)
Price : RM800 nego (without installation)

[CLICK TO VIEW LARGE IMAGE]
Item Type : Piston
Product Name : JE PISTON (Custom Piston)
Specification : 82mm & 83mm
For Engine : Mitsubishi 4G9x NA & MIVEC
Comes with
Piston Ring Set
-2 x Compression Ring each piston
-1 x Oil Ring each piston
Piston Pin(Small Bearing) each piston
Price : Rm3100 nett without installation.

[CLICK TO VIEW LARGE IMAGE]
Item Type : Camshaft
Product Name : Matspeed (regrind camshaft)
For 4G93 NA
Degree Angle :
1)Int:292 Ext:300
2)Int:288 Ext:300
3)Int:282 Ext:288
Price :
RM2200 included installation and setup fee
RM1800 Cash and Carry.

How to purchase click here

MHTUNER join Tarmac Rally Series

2009-03-15T04:22:00.000-07:00

Sunday 15 Mar 2009 Shah Alam_ Mhtuner going rally with Subaru Impreza driven by Muzambique and navigated by Rouf. Mhtuner team run under Group "N"(standard production vehicles) lead by Mohd Ikmal as Team Manager cum Senior Technican. These are some of the picture.

Tarmac Rally Series Organize by Kelab Kart Selangor (KKS)

MHTUNER PIT CREW

Other Contestant

Products that we sell

2009-02-17T01:36:00.001-08:00

Performance items that you can look at mhtuner.

[CLICK ITEM TO VIEW LARGE IMAGE]

1. 2. 3.

4. 5. 6.

7. 8. 9.10.11.

12. 13. 14.

15.

Click to view
1.SKUNK2 Fuel Rail
2.WISECO PISTON
3.JUN High Camshaft
4.Intake Hose
5.Multiple Product [Carbon fiber Plug Cabel Cover|Ralliart Radiator Cap|AeroSpeed Adjustable Camshaft Pulley|
SARD Adjustable Fuel Regulator|AeroSpeed Oil Catch Tank]
6.TRINITI Clutch Disc
7.AD PRO Gear Treatment
8.MOTUL FF-LSD SAE75W90 GEAR OIL
9.MOTUL 4100 Turbolight SAE 10W40
10.GATES Timing Belt
11.BONET CLIP
12.HALTECH E6X
13.SATRIA FIBER BONET
14.GARRET Turbo AR.50
15.FINAL RATIO GEAR

Dear Value Customer

2009-01-30T02:46:00.001-08:00

Introducing to our firstly and newly blog for our business. This blog was created for medium communication between Mhtuner and customer/client.

We hope that this blog will be helpful to our existing customer and new customer.

You can contact us via

email :
mhtuner@hotmail.com
mohd.azwan@live.com.my

Office :
+60 03 51925646

Managing Director :
Mohd Ikmal
+60 193454710

Click here to go to MHtuner via wikimapia